ABEC-681ZZ - Walkera UFLY/S Replacement Tail Grip Bearing Set (2)

Hight Quality ABEC-3 Bearings
Replace stock bearings by these high quality ABEC-3 bearings with much higher tolerance and smoothness and feel a much difference in response.
Specifications:
• Bearing 681ZZ 1.5mm x 4 x 2mm
Quantity:
• 2 Bearings

HK-2206-5300 - Scorpion HK-2206-5300 Brushless Motor 2S (5300KV) NEW! - Hurricane 200
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.
This particular motor is specifically designed for the new smaller electric helicopters such as the Gaui Hurricane 200, and features a 2.3mm output shaft that fits the stock 2.3mm pinion gears.
All Scorpion HK Series 22mm motors come with the new 2.5mm male Scorpion Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter use, they do not include a prop adapter.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

Specifications:
Stator Diameter: 22.0 mm (0.866 in)
Stator Thickness: 6.0 mm (0.236 in)
No. of Stator Arms: 9
No. of Magnet Poles:6
Motor Wind: 24 Turn Delta
Motor Wire: 8-Strand 0.21mm (31 AWG)
Motor Kv: 5300 RPM / Volt
No-Load Current (Io): 2.12 Amps at 6 volts
Motor Resistance (Rm): 0.031 Ohms
0.031 Ohms: 18 Amps
Max Continuous Power: 130 Watts
Weight: 34 Grams (1.21 oz)
Outside Diameter: 27.9 mm (1.097 in)
Shaft Diameter: 2.30 mm (0.091 in)
Body Length: 22.6 mm (0.890 in)
Overall Shaft Length: 32.6 mm (1.283 in)
Notes:Can be Used as an Upgrade Motor for the Walkera UFLY.

HM-UFLY-Z-01 - Walkera UFLY Rotor Head Set
Walkera Rotor Head Set

HM-UFLY-Z-02 - Walkera UFLY Main Blades Holder
Walkera UFLY Main Blades Holder

HM-UFLY-Z-03 - Walkera UFLY Shwashplate
Walkera UFLY Shwashplate

HM-UFLY-Z-04 - Walkera UFLY Guide Ring Set
Walkera UFLY Guide Ring Set

HM-UFLY-Z-05 - Walkera UFLY Motor Retainer Frame
Walkera UFLY Motor Retainer Frame

HM-UFLY-Z-06 - Walkera UFLY Skid Landing
Walkera UFLY Skid Landing

HM-UFLY-Z-07 - Walkera UFLY Linkage Set
Walkera UFLY Linkage Set

HM-UFLY-Z-08 - Walkera UFLY Main Shaft
Walkera UFLY Main Shaft

HM-UFLY-Z-09 - Walkera UFLY Tail Rotor Shaft
Walkera UFLY Tail Rotor Shaft

HM-UFLY-Z-10 - Walkera UFLY Tail Boom
Walkera UFLY Tail Boom

HM-UFLY-Z-11 - Walkera UFLY Tail Driven Shaft
Walkera UFLY Tail Driven Shaft

HM-UFLY-Z-12 - Walkera UFLY Tail Linkage Set
Walkera UFLY Tail Linkage Set

HM-UFLY-Z-13 - Walkera UFLY Tail Strut
Walkera UFLY Tail Strut

HM-UFLY-Z-14 - Walkera UFLY Aluminum Ball
Walkera UFLY Aluminum Ball

HM-UFLY-Z-15 - Walkera UFLY Stabilizer
Walkera UFLY Stabilizer

HM-UFLY-Z-16 - Walkera UFLY Main Rotor Blade
Walkera UFLY Main Rotor Blade

HM-UFLY-Z-17 - Walkera UFLY Flybar
Walkera UFLY Flybar Screw

HM-UFLY-Z-18 - Walkera UFLY Flybar Paddle
Walkera UFLY Flybar Paddle

HM-UFLY-Z-19 - Walkera UFLY Tail Rotor Blade
Walkera UFLY Tail Rotor Blade

HM-UFLY-Z-20 - Walkera UFLY Main Frame
Walkera UFLY Main Frame

HM-UFLY-Z-21 - Walkera UFLY Servo Holder
Walkera UFLY Servo Holder

HM-UFLY-Z-22 - Walkera UFLY Main Gear
Walkera UFLY Main Gear

HM-UFLY-Z-23 - Walkera UFLY Gear Set
Walkera UFLY Gear Set

HM-UFLY-Z-24 - Walkera UFLY Tail Gear Holder
Walkera UFLY Tail Gear Holder

HM-UFLY-Z-25 - Walkera UFLY Rudder Servo Arm
Walkera UFLY Rudder Servo Arm

HM-UFLY-Z-26 - Walkera UFLY Tail Steering Set
Walkera UFLY Tail Steering Set

HM-UFLY-Z-27 - Walkera UFLY Tail Blades Holder
Walkera UFLY Tail Blades Holder

HM-UFLY-Z-28 - Walkera UFLY Canopy
Walkera UFLY Canopy

HM-UFLY-Z-29 - Walkera UFLY Bearing Set
Walkera UFLY Bearing Set

HM-UFLY-Z-30 - Walkera UFLY Screw Set
Walkera UFLY Screw Set

HM-UFLY-Z-31 - Walkera UFLY Rubber Band
Walkera UFLY Rubber Band

HM-UFLY-Z-32 - Walkera UFLY Servo (9g-5)
Walkera UFLY Servo (9g-5)

HM-UFLY-Z-33 - Walkera UFLY Battery (7.4V 800mAh)
Walkera UFLY Battery (7.4V 800mAh)

HM-UFLY-Z-34 - Walkera UFLY Charger (GA005)
Walkera UFLY Charger (GA005)

HM-UFLY-Z-35 - Walkera UFLY Otu-runner Brushless Motor
Walkera UFLY Otu-runner Brushless Motor

HM-UFLY-Z-36 - Walkera UFLY Speed Controller
Walkera UFLY Speed Controller

HM-UFLY-Z-37 - Walkera UFLY Receiver (RX-2424A)
Walkera UFLY Receiver (RX-2424A)

HM-UFLY-Z-38 - Walkera UFLY 2.4 GHz Radio (WK-2402)
Walkera UFLY 2.4 GHz Radio (WK-2402)

HP-LG325-1100-2S - HYPERION G3 CX 1100 MAH 2S 7.4V 25C/45C LIPOLY PACK

Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.
But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.
The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake
The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.
The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.
Can be Used as an Upgrade in the Walkera UFLY/S
JST Sold Seperately.

HP35C18002S - HYPERION G3 VX 1800 MAH 2S 7.4V 35C/65C LIPOLY PACK
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.
But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.
The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.
The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.
The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.
Hyperion Battery Specifictions:
Capacity: 1800mah
C Rating: 35C/65C
Voltage: 7.4V 2S
Size: 84.7mmx27.8mmx17.9mm (LxWxH)
Weight: 94g
Wire Gauge: 14AWG
Balance Adapter: Polyquest.

Please Note this Battery Fits in The Futaba T8FG Transmitter and Walkera HM UFLY Helicopter with Scorpion Motor Up Grade.

HPLG32S850 - Hyperion CX G3 Series 2S 850mah Li-Po Battery
Hyperion 2S 850mah CX G3 Series Li-Po Battery
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.
But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.
The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.
The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs
Hyperion Battery Specifictions:
Capacity: 850mah C Rating: 25C/45C
Voltage: 7.4V 2S
Size: 73.5mmx25.8mmx12.5mm (LxWxH)
Weight: 48g
Balance Adapter: Polyquest.
Battery Up Grade For The Walkera HM-UFLY Helicopter.

UFRUK1 - Walkera UFLY Reciver Upgrade Kit
Walkera UFLY Upgrade Set
Items included:
• 4 Motor Servo Adaptors
• 3 Servo Connector with Wires
• 1 ESC Connector with Wires
• 1 RX-2428 Reciever
• 1 Feigao 18A Speed Controller

UFWUK1 - Walkera UFLY Servo Upgrade Conversion Set
Walkera UFLY Upgrade Conversion Set
Items included:
• 4 Motor Servo Adaptors
• 3 Servo Connector with Wires
• 1 ESC Connector with Wires

V-1427 - Walkera UFLY Upgrade Pinion Set 9 & 10T
Walkera UFLY Upgrade Pinion Upgrade Set
Items Included:
9 tooth and 10 tooth pinions
Specs:
2.3mm bore 0.4Mod
To be Used with Our UFLY Power Upgrade Kit.SOLD OUT.

V-1428 - Walkera UFLY Upgrade Pinion Set 11 &12T
Walkera UFLY Upgrade Pinion Upgrade Set
Items Included:
11 tooth and 12 tooth pinions
Specs:
2.3mm bore 0.4Mod
To be Used with Our UFLY Power Upgrade Kit.

V-1429 - Walkera UFLY Upgrade Pinion Set 13 & 14T
Walkera UFLY Upgrade Pinion Upgrade Set
Items Included:
13 tooth and 14 tooth pinions
Specs:
2.3mm bore 0.4Mod
To be Used with Our UFLY Power Upgrade Kit.

V-1430 - Walkera UFLY Upgrade Pinion Set 15 & 16T
Walkera UFLY Upgrade Pinion Upgrade Set
Items Included:
15 tooth and 16 tooth pinions
Specs:
2.3mm bore 0.4Mod
To be Used with Our UFLY Power Upgrade Kit.

rczb681xzz - Replacement Tail Grip Bearings For UFLY and UFLY-S
1.5mm x 4mm x 2mm Metal Shielded Bearing (3pack)
As some may not know Walkera Does not Supply the Bearings for the tail Blade Grips in the Walkera UFLY and UFLY-S Bearing Set.
So if you loose a Blade Grip or a Bearing Goes Bad you will need this Bearing Set to get back in the Air again.