A30-28S-V2 - Hacker Brushless 300W 1140k/V Outrunner Motor

The New A30 V2 series motors are designed for larger Parkflyers, 3D-Aerobatic, Scale models and Helicopters using 2 to 5 series LiPoly batteries.

They now feature a new rotor cooling design with an integral cooling system, as well as better stator effiency design.The A30-28S is designed for 20 to 30 oz. Parkflyers and 3D-Aerobatic models with 2-3 cell LiPoly batteries. This 14 pole, Outrunner design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. These motors produce more power with lower current consumption than other popular Outrunner designs!

Includes backmount, prop adapter and all screws. 3.5mm gold bullet connectors are provided.

Specifications:
• Peak Watts: 300
• kV (RPM/V): 1140
• Diameter: 1.46 in
• Length: 1.33 in
• Weight: 2.80 oz.

Recommended Products:
• APC 10x5 E-Prop
• X-30 Pro ESC

C-2204-58 - COBRA C-2204/58 1080Kv Brushless 22mm Motor

Cobra C-2204/50 1080Kv Brushless 22mm Out-Runner Motor
The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life.
The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.
Included with every Cobra 2204 Series Motor is a complete accessory package which contains the following items:
• Four M2x8mm Motor Mount Screws
• O-ring prop adapter with 2 screws
• 20mm dia. x 2mm O-Ring

Cobra C-2204/58 Motor Specs:

• Stator Diameter 22.0mm
• Stator Thickness 4.0mm
• No. of Stator Arms 12
• No of Magnet Poles 14
• Motor Wind 58 Turn Delta
• Motor Kv 1080
• No-Load Current .20amps at 8V
• Motor Resistance Per Phase 0.477 Ohms
• Max Cont Current 7 amps
• Max Power 2S 55watts
• Max Cont Current 3S 80watts
• Weight 22.5grams
• outside Diameter 27.0mm
• Shaft Diameter 3.0mm
• Body Lenght 14.2mm
• Overall Shaft Lenght 21.8mm
• Props Tested by AddictiveRC 7inch and 8inch

C-2213-26 - COBRA C-2213-26 950Kv Brushless 22MM Motor

Cobra C-2213/26 Brushless 22mm 950Kv Motor

The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life.
The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.
Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.
To complete the package, a complete hardware accessory kit is included with every Cobra Motor. Included in this hardware kit are the following items:

• Heavy Duty 3mm Thick Cross Style Motor Mount
• Four M3x6mm Motor Mount Screws
• Bolt-On style theaded prop adapter with 3 screws
• Retaining Collar with Set Screw
• Three female 3.5mm bullet connectors
• Three pieces of heat-shrink tubing

Cobra C-2213/26 Motor Specs:
• Stator Diameter: 22.0 mm
• Stator Thickness: 13.0 mm
• No. of Stator Arms 12
• No. of Magnet Poles 14
• Motor Wind 26 Turn Delta
• Motor Kv 950/V
• No-Load Current 0.45 Amps at 8V
• Motor Resistance Per Phase 0.201 Ohms
• Motor Resistance Phase to Phase 0.134 Ohms
• Max Continuous Current 14Amps
• Max Continuous Power on 3S Li-Po 150 Watts
• Weight 61.0 Grams
• Outside Diameter 27.7 mm
• Shaft Diameter 3.17 mm
• Body Length 28.0 mm
• Overall Shaft Length 42.0 mm
• Props Sizes on 3S LiPo 10x3.8SF 10x4.7SF

CBDL-11A - Cobra 11A ESC W/2A Linera BEC

Cobra 11A ESC W/2A Linera BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.
Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.
All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. The 11A and 22A models come with a 5.0 volt linear BEC rated for 2 amps of current. The 33A model comes with a 5.5 volt switching type BEC rated for 3 amps of current. The 40A, 60A, 80A, 100A and 150A models come with a 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.
Since the Cobra 11A ESC is typically used in smaller 2 to 3-cell powered indoor aircraft, where most users solder the motor directly to the ESC to save weight, no bullet connectors are provided on the motor output leads. The leads are provided pre-tinned ready to solder.

Cobra 11 Amp Speed Controller Specifications:

• Weight: 9.9g
• Max Cont. Current: 11amps
• Burst Current rating (15sec): 14amps
• Operating Voltage: 6 to 12volts
Li-Po Cells: 2 to 3S
• BEC output: 2amps at 5v
• ESC Size (Incl Caps): 30 x 18 x 10mm.

H-A10-9L - A10-9L Hacker Brushless 75W 1700k/V Out Runner Motor

The A10 motors are the smallest outrunner of our series and provide great efficiency and light weight. Developed for 4-8oz Slowflyers and Aerobatic Parkflyer models with 2 cell LiPoly batteries.
The Hacker A10-9L is a unique, 12 pole, precision, micro, outrunner type design. The innovative brushless motor has very high torque and excellent efficiency at an extremely low weight. This motor features Oversized bearings, curved magnets, and a high efficiency stator design. The Curved Neodym-Magnets offer a perfect gap from the inside of the rotor for optimal power and efficiency.
Specs:
Peak Watts: 75
kV(RPM/V): 1700
Diameter: 0.83 in
Length: 0.98 in
Weight: 0.70 oz.
Shaft Diameter: 2.0mm
Idle Current: 0.72A
Operating Current: 5A
Peak Current: 7A
Resistance: 0.1800 ohms
Poles:12
Orientation: Outrunner

H-A20-12XL - A20-12XL Hacker Brushless 300W 1039k/V Out Runner Motor

Hacker A20-12XL Brushless Motor
The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 20-25oz Aircraft.
The A20-12XL has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Includes mounting hardware and 2 spare shafts.
Specs:
Peak Watts: 300
kV(RPM/V): 1039
Diameter: 1.10 in
Length: 1.57 in
Weight: 2.95 oz
Shaft Diameter: 3.17 mm
Shaft Diameter W/ GB mm
Idle Current: 1.00A
Operating Current: 20A
Peak Current: 35A
Resistance: 0.0750 ohms
Poles: 14
Orientation: Out-runner

H-A20-20L - A20-20L Hacker Brushless 200W 1022k/V Out Runner Motor
Hacker A20-20L Brushless Out-Runner Motor
The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 12-18 oz. Parkflyer models with 3 cell LiPoly batteries.
The A20-20L has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.
Specs:
Peak Watts: 200
kV(RPM/V): 1022
Diameter: 1.10 in
Length: 1.33 in
Weight:1.93 oz
Shaft Diameter: 3.00 mm
Shaft Diameter W/ GB mm
Idle Current: 0.85A
Operating Current: 15A
Peak Current: 19A
Resistance: 0.1090 ohms
Poles: 14
Orientation: Out-runner

H-A20-22L - A20-22L Hacker Brushless 200W 924k/v Out Runner Motor

The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 12-18 oz. Parkflyer models with 3 cell LiPoly batteries.
The A20-22L has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.
Specs:
Peak Watts: 200
kV(RPM/V): 924
Diameter:1.10 in
Length:1.33 in
Weight: 2.01 oz.
Details:
Idle Current:0.75A
Operating Current:14A
Peak Current:17A
Resistance: 0.0890 ohms
Poles:14
Orientation: Outrunner

H-A20-26M - A20-26M Hacker Brushless 150W 1130k/V Out Runner Motor

Hacker A20-26M Brushless Out-Runner Motor
The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 7-12 oz. Slowflyers and Aerobatic Parkflyer models with 3 cell LiPoly batteries.
The A20-26M has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.
Specs:
Peak Watts:150
kV(RPM/V): 1130
Diameter: 1.10 in
Length: 1.18 in
Weight:1.48 oz
Shaft Diameter: 3.00 mm
Shaft Diameter W/ GB mm
Idle Current: 0.70A
Operating Current: 12A
Peak Current: 15A
Resistance: 0.1170 ohms
Poles:14
Orientation: Out-runner
Power House Up Grade For the Gaui 330X and 330X-S!

H-A20-34S - A20-34S Hacker Brushless 100W 1500k/V Out Runner Motor

Hacker A20-34S Brushless Out-Runner Motor
The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 4-8 oz. Indoor Slowflyers and Indoor Aerobatic models with 2 cell LiPoly batteries.
The A20-34S has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.
Specs:
Peak Watts: 100
kV(RPM/V): 1500
Diameter: 1.10 in
Length: 0.94 in
Weight: 1.02 oz
Shaft Diameter: 3.00 mm
Shaft Diameter W/ GB mm
# Idle Current: 0.75A
Operating Current: 7A
Peak Current: 10A
Resistance: 0.1470 ohms
Poles: 14
Orientation: Out-runner

H-A20-50S - A20-50S Hacker Brushless 100W 1088k/V Out Runner Motor

Hacker A20-50S
The A20 motors are small Outrunners and provide great efficiency and light weight. They are ideal for 4-8 oz. Indoor Slowflyers and Indoor Aerobatic models with 2-3 cell LiPoly batteries.
The A20-50S has a Slotted, 14 pole, outrunner design. This motor features Oversize bearings, Curved Neodym-magnets, and a High Efficiency stator. These motors produce more power with lower current consumption than other popular Outrunner designs!
Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.
Specs:
• Peak Watts 100W
• Kv 1088
• Diameter 1.10 inch.
• Length 0.94 Inch.
• Weight 1.02 Oz.
• Idle Current 0.4A
• Operating Current 8Amps
• Poles 14
• Orientation Out Runner.
Nice Upgrade for Gaui 330X Quad/UAV!

HW10A-ESC - HobbyWing 10amp ESC

HobbyWing 10amp Speed Controller

Specs:
• Output: 10A, Burst 12A up to 10Secs.
• Input: 2 to 4 Cells Li-Po
• BEC: 1A/5V Linear mode
• Size: 27mm x 17mm x 6mm
• Weight: 9g.

Features:
Military Spec Components!

HXM2730-1300 - HexTronik 24gram Brushless Out-Runner 1300kv

HexTronik 1300Kv 24gram Brushless Out-Runner Motor
Kv: 1300rpm/v
Max Load: 7.5A
Suggested Lipo: 3 Cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8
Weight: 20g
Shaft Size: 3mm
Diameter 27mm
Length: 30mm
Suitable For KarbonicDrones Multicopter Frames.

HXM2730-1500 - HexTronik 24gram Brushless Out-Runner 1500kv

HexTronik 1500Kv 24gram Brushless Out-Runner Motor
Kv: 1500rpm/v
Max Load: 7.5A
Suggested Lipo: 3 Cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8
Weight: 20g
Shaft Size: 3mm
Diameter 27mm
Length: 30mm
Suitable For KarbonicDrones Multicopter Frames.

M2814-11S - AVROTO M2814-11S Short Shaft 770KV Brushless UAV Motor

New!
In Stock
Avroto M2814-11S Short Shaft 770KV Brushless UAV Motor

Specs:
• Weight Approx. 100 grams not including wires
• 35mm D 36mm L
• Shaft Diameter 4MM
• Prop Diameter 6MM
• No-Load Speed 770 rpm per Volt
• 350 Watts
• Current Capacity 22Amps for 60sec
• Wire Lenght 600MM
• 14 Magnets 12 Stator Arms

Hardened Shaft Made in Japan
High Quality EZO Bearings From Japan

Includes:
Radial Mount Set with Prop Adaptor
Performance:
Prop: APC 10x4.7SF 122 watts on 3S Thrust 30.4 OZ
Prop: APC 11x4.7SF 163 watts on 3S Thrust 39.0 OZ
Prop: APC 12x3.8SF 201 watts on 3S Thrust 46.3 OZ
Prop: APC 10x4.7SF 266 watts on 4S Thrust 50.9 OZ
Prop: 11x4.7SF 346 watts on 4S Thrust 60 OZ
Prop: 12x3.8SF 423 watts on 4S Thrust 60.3OZ Thrust.

MN3110-15-KV780 - T-MOTOR MN 3110-15 KV 780 NAVIGATOR SERIES BL MOTOR

New! TigerMotor Navigator Series 3110-15 KV 780 Brushless Multi-Rotor Motor.

MN3110-17-KV700 - T-MOTOR MN 3110-17 KV 700 NAVIGATOR SERIES BL MOTOR

New! TigerMotor Navigator Series 3110-17 KV 700 Brushless Multi-Rotor Motor.

MN3510-13-KV700 - T-MOTOR MN 3510-13 KV 700 NAVIGATOR SERIES BL MOTOR

New! TigerMotor Navigator Series MN3510-13 KV700 Brushless Multi-Rotor Motor

MN4014-11-330KV - T-MOTOR MN 4014-11 KV 330 NAVIGATOR SERIES BRUSHLESS MOTOR

New! TigerMotor Navigator Series MN4014-11 KV330 Brushless Multi-Rotor Motor

MN4014-9-KV400 - TigerMotor MN4014-9-KV400 Navigator Series Multirotor Motor
New! MN4014-9-KV400 TigerMotor Navigator Series Brushless Motor

Specs:
- KV: 400
- Config: 18N24P
- Stator Diam: 44.8mm
- Stator Length: 34.5mm
- Shaft Diam: 4mm
- Weight (Wire not included): 150g
- Total Weight: 169g

Includes:
- 6mm dia prop adaptor
- 8mm dia prop adaptor
- Direct Mount for (CF DJI-S800 Prop).

MT-2216-10 - Tiger Motor Multicopter MT-2216-10 900Kv Brushless Motor

New!
Tiger Motor MT-2216-10 900KV
Very Nice For Multi-Copters!

MT-2216-11 - Tiger Motor Multicopter MT-2216-10 800Kv Brushless Motor

New!
Tiger Motor MT-2216-11 800KV
Very Nice For Multi-Copters!

MT-4006-13-KV740 - T-MOTOR MT4006-13 KV740 Brushless Multi-Rotor Motor

New! TigerMotor MT Series MT4006-13 740KV Brushless Multi-Rotor Motor.

MT3515-15 - TigerMotor MT3515-15 KV 400 Brushless Motor

TigerMotor MT3515-15 400KV Pro Series BL Motor

T-Motor Multicopter motor 3515-15 KV400 188grams.
Short Shaft, Long Wires, 3.5mm bullet connectors attached. New Larger prop adapter with 8mm dia shaft.

TNGY-2205C-1400 - HexTronik 28gram Brushless Out-Runner 1400Kv

HexTronik 1400Kv 28gram Brushless Out-Runner Motor
Kv: 1400rpm/v
Max Load: 9.5Amps(3S)
Suggested Lipo: 3 Cell 11.1v
Max Thrust: 497g
Suggested Prop: 8x3.8
Weight: 28g
Shaft Size: 3mm
Diameter 28mm
Total Length: 26mm
Props: 7inch to 9inch
Can run on 2S to 3S Li-Po
Suitable for KarbonicDrones Mutlicopter Frames.

TNGY-PK300-1080 - TNGY PARK-300 1080KV Brushless Out-Runner

TNGY Park-300 1080KV BL Out-Runner Motor
85Watts
We convert the Shaft For Multi-Rotor Mounting
Specs:

• 2 to 3S Li-Po
• RPM: 1080KV
• Max Current: 7AMPS
• Weight: 24g
• Shaft Diam: 3mm
• Dimensions: 37mmx28mm

Required:

• 6x5 to 8x3.8 Prop
• 10A ESC
• 2 to 3S Li-Po
Suitable For KarbonicDrones Multicopter Frames

TNGY-PK300-1380 - TNGY PARK-300 1380KV Brushless Out-Runner

TNGY Park-300 1380KV BL Out-Runner Motor
77Watts
We convert the Shaft For Multi-Rotor Mounting
Specs:

• 2 to 3S Li-Po
• RPM: 1380KV
• Max Current: 7AMPS
• Weight: 24g
• Shaft Diam: 3mm
• Dimensions: 37mmx28mm

Required:

• 6x5 to 8x3.8 Prop
• 10A ESC
• 2 to 3S Li-Po
Suitable For KarbonicDrones Multicopter Frames

TNGY-PK300-1600 - TNGY PARK-300 1600KV Brushless Out-Runner

TNGY Park-300 1600KV BL Out-Runner Motor
85Watts
We convert the Shaft For Multi-Rotor Mounting
Specs:

• 2 to 3S Li-Po
• RPM: 1600KV
• Max Current: 7AMPS
• Weight: 24g
• Shaft Diam: 3mm
• Dimensions: 37mmx28mm

Required:

• 6x5 to 8x3.8 Prop
• 10A ESC
• 2 to 3S Li-Po
Suitable For KarbonicDrones Multicopter Frames

TR-P10A - TURNIGY Plush 10amp 9gram Speed Controller

TURNIGY Plush 10amp 9gram Speed Controller
The Plush series of ESC are a very good quality controller with a broad range of programming Features.
Smooth linear Throttle Response.
Features:
Cont. Current: 10A
Burst Current: 12A
BEC Mode: Linear
BEC: 5V/2A
Lipo Cells: 2-4
Weight: 9g
Size: 27x17x6mm
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.

iBM2814-11 - iPower iBM2814 Kv750 Short Shaft BL Motor

iPower iBM2814 750KV Brushless Out-Runner Motor
An Excellent Motor for the money for Multi-Rotor Applications
Specs:
- KV 750
- Cont. Current: 20.3A
- Max Current: 22.7A
- Input Voltage: 6-14.8V
- Max Efficiency: 80%
- Internal Resistance: 0.063
- Power: 370watts
- Weight: 108grams
- Size: 35 x 36mm
- Shaft diameter: 5.0mm
- Prop sizes: 10x7, 11x4, 12x5

Supplied with mount and prop adaptor,gold connector soldered.
Prop adapter and mount color may be black or silver.