CSUSVMINI - Helicopter Kit Build and Set Up Micro To Mini Sized Helicopters
We Now Have a Professional Staff to Build all our Helicopter Kits for sale on the RC Hobby Helicopter web Store.
Kits Sizes From the Gaui 200 and Align Trex 250 to 600 EP Helicopters.
With your Choice of on board Electronics.
The entire Heli is Built and test flown Ready to Fly with Radio Settings Sheet and Actual 3D Flying Video
Please Call for Details.
Not Including Shipping.
From 200 Size to 450 Size Helicopters Only!

G-203796 - Gaui Hurricane 200 MD500 Scale Body (GB-A) Combo Kit
• The finest Scale micro helicopter comes with tail converted H200 V2 kit which is easy for completion.
• Equipped with fine scale Fin / Tail / Landing Gear Strut / Jet Nozzle / Painted FRP Fuselage.
• Painted FRP Fuselage comes with transparent windows and windshield.
• Auto-attached magnetic cockpit results in a easy maintenance.
• Equipped with LED Flashlight Set.
• Equipped with BL motor and 18A ESC.
• Multi gear reduction for tail driven, which can increase the tail speed and enhance efficiency of tail control, especially for the kits which equipped with multi-blade main rotor head for lower head speed.
• Different Upper Conversion Pulleys (16T / 17T / 18T) for option which are able to increase the tail speed up to 6.25% (17T/16T) or 12.5% (18T/16T).
• Easy to upgrade to Flybarless 2Blade and multi-blade main rotor head. (Options for 2Blade / 3Blade / 5Blade)
• Options for FES Flybarless System.
• More Painted FRP Fuselages for option.

Specification:
• Overall length: 430mm ( not including main blade)
• Overall width : 120mm ( including landing gear)
• Overall height: 200mm ( Include vertical tail fin)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 450 ~ 470g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Options for Wooden and CF blades.
• Flying duration: 3~5 minutes with 7.4v/900mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or GU-365 FES gyro for flybarless multi rotor head )
• Battery : Li-Po battery (7.4v~11.1v/900mah/15C or more)
• Charger: Li-Po battery charger

G-203797 - Gaui Hurricane 200 MD500 Scale Body (GB-B) Combo Kit
• The finest Scale micro helicopter comes with tail converted H200 V2 kit which is easy for completion.
• Equipped with fine scale Fin / Tail / Landing Gear Strut / Jet Nozzle / Painted FRP Fuselage.
• Painted FRP Fuselage comes with transparent windows and windshield.
• Auto-attached magnetic cockpit results in a easy maintenance.
• Equipped with LED Flashlight Set.
• Equipped with BL motor and 18A ESC.
• Multi gear reduction for tail driven, which can increase the tail speed and enhance efficiency of tail control, especially for the kits which equipped with multi-blade main rotor head for lower head speed.
• Different Upper Conversion Pulleys (16T / 17T / 18T) for option which are able to increase the tail speed up to 6.25% (17T/16T) or 12.5% (18T/16T).
• Easy to upgrade to Flybarless 2Blade and multi-blade main rotor head. (Options for 2Blade / 3Blade / 5Blade)
• Options for FES Flybarless System.
• More Painted FRP Fuselages for option.

Specification:
• Overall length: 430mm ( not including main blade)
• Overall width : 120mm ( including landing gear)
• Overall height: 200mm ( Include vertical tail fin)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 450 ~ 470g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Options for Wooden and CF blades.
• Flying duration: 3~5 minutes with 7.4v/900mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or GU-365 FES gyro for flybarless multi rotor head )
• Battery : Li-Po battery (7.4v~11.1v/900mah/15C or more)
• Charger: Li-Po battery charger

G-203801 - Gaui Hurricane 200 Tigershark F3C Scale Body (GA-A)
• The only and tiniest F3C Scale micro helicopter comes with H200 V2 kit which is easy for completion.
• Equipped with fine finishing Painted FRP Fuselage.
• The streamlined fuselage which provides a fast forward speed.
• Integrated body and tail provides high strength and rigidity to withstand crash.
• Fuselage comes with more inside space which provides easy installing.
• Auto-attached magnetic cockpit results in easy maintenance.
• Equipped with BL motor and 18A ESC.
• Options for FES Flybarless System.
• More Painted FRP Fuselages for option.

Specification:
• Overall length: 430mm ( not including main blade)
• Overall width : 100mm ( including landing gear)
• Overall height: 160mm ( Include vertical tail fin)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 410 ~ 430g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Options for Wooden and CF blades
• Flying duration: 3~5 minutes with 7.4v/900mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or GU-365 gyro for FES rotor head )
• Battery : Li-Po battery (7.4v~11.1v/900mah/15C or more)
• Charger: Li-Po battery charger

G-203802 - Gaui Hurricane 200 Tigershark F3C Scale Body (GA-B)
• The only and tiniest F3C Scale micro helicopter comes with H200 V2 kit which is easy for completion.
• Equipped with fine finishing Painted FRP Fuselage.
• The streamlined fuselage which provides a fast forward speed.
• Integrated body and tail provides high strength and rigidity to withstand crash.
• Fuselage comes with more inside space which provides easy installing.
• Auto-attached magnetic cockpit results in easy maintenance.
• Equipped with BL motor and 18A ESC.
• Options for FES Flybarless System.
• More Painted FRP Fuselages for option.

Specification:
• Overall length: 430mm ( not including main blade)
• Overall width : 100mm ( including landing gear)
• Overall height: 160mm ( Include vertical tail fin)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 410 ~ 430g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Options for Wooden and CF blades
• Flying duration: 3~5 minutes with 7.4v/900mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or GU-365 gyro for FES rotor head )
• Battery : Li-Po battery (7.4v~11.1v/900mah/15C or more)
• Charger: Li-Po battery charger

G-203910 - Gaui Hurricane 200 Pro Carbon ARF Kit
Includes:
• 90% Assembled Carbon Fiber Kit
• CNC Head
• CNC Tail
• Plastic Blades
• Decal Sheet
• Painted Fiberglass Canopy
• Gaui Brushless Motor (4800kv)
• Brushless ESC (12amp)
• Assembly Instructions

Recommended Setup:
Cyclic Servos: Hitec HS-45s
Tail Servo: Hitec HS-5083 or Futaba S-3154
Gyro: Hitec HG-5000 Gyro with 5083 Digital Servo
Receiver: 6 Channel Micro Receiver
Battery: Hyperion 7.4V LVX 800 mAh Lipoly Battery (HP-LVX8002S) or equivalent (Motor & pinion are geared for 7.4V).

Specs
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV4800 brushless motor (included)
• Motor: KV4800 brushless motor (included)
• Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: SP Blades(included) or Wooden(option)
• Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery

G-203915 - New Gaui Hurricane 200 Se with Torque Tube Tail Drive
NEW! Gaui Hurricane 200 SE Pro With Torque Tube Tail Drive
IN STOCK
Includes
90 Percent Assembled
Brushless Motor 4800KVPainted Fiberglass Canopy
CNC Head
Shaft Drive Tail
Plastic Blades
Decals
Assembly Instructions

G-203917 - Gaui Hurricane 200 V2 Kit Combo w/ Motor, ESC, Gyro
Gaui Hurricane 200 V2 Kit Combo With 5600kV Motor, 18A ESC, GU-210 Gyro

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Partial assembled modulate parts which is easy for completion.
• Partial assembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New GF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New Fin and Tail(Type E).
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and 42mm Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).
• Kit comes with 4 GS-045HB Sub-micro servos and 1 GU -210 heading hold gyro

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 6 (or more) channel micro receiver
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203918 - Gaui Hurricane 200 V2 Combo w/ 5600kV Motor, 18A ESC, GM-045 Servos
HURRICANE 200 KIT FORM (UNASSEMBLED) WITH NEW 5600 KV MOTOR, 18 AMP ESC, AND THREE GM045 SERVOS & BLADES

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Partial assembled modulate parts which is easy for completion.
• Partial assembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New Fin and Tail(Type E).
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and 42mm Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system
• CCPM collective pitch mechanism (variable pitch).

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or higher level are recommended)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203919 - Gaui Hurricane 200 V2 Kit (with Motor and ESC)
Hurricane 200 Kit Form (Unassembeled) With New 5600kV Motor, 18A ESC, and Blades

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo batterin this class).
The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Partial assembled modulate parts which is easy for completion.
• Partial assembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New Fin and Tail(Type E).
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and 42mm Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:

• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or higher level are recommended)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203920 - Gaui Hurricane 200 V2 SE ARF
Gaui Hurricane 200 V2 SE ARF (with Motor and ESC)

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of HS-45HB or HS-65MG servo).
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
• Fully equipped ball bearings.(33~37 pieces of micro bearings)
• Seesawhead with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV4800 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 260g ~ 280g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or higher level are recommended)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203922 - Gaui Hurricane 200 V2 Combo
Gaui Hurricane 200 V2 Combo with 5600KV Motor, 18A ESC, and Connectors

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Partial assembled modulate parts which is easy for completion.
• Partial assembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New Fin and Tail(Type E).
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and 42mm Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or GS-045HB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or higher level are recommended)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203930 - Gaui Hurricane 200 V2 FES ARF
Gaui Hurricane 200 V2 FES ARF (with motor and ESC)

• The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size.
• Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with BL motor and 18A ESC
• New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
• New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.

Specifications:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV4800 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 265g ~ 285g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
• 1 Micro Digital servo for tail control
• 6 (or more) channel micro receiver
• GAUI GU-365 FES gyro (Flybarless E-Stabilizer System)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203931 - Gaui Hurricane 200 V2 FES Combo
Gaui Hurricane 200 V2 FES Combo (with motor, ESC, and FES Gyro)

• The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size.
• Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with BL motor and 18A ESC.
• New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
• New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control
• New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.

Specifications:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV4800 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 265g ~ 285g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery


Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203932 - Gaui Hurricane 200 V2 XFES Flybarless ARF
• The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size
• Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with BL motor and 18A ESC.
• New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
• New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy
• High Performance Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.
• Kit comes with additional Gold Plated Connectors (1.8mm) with Heat Shrink Tubing for Motor and ESC

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 285g ~ 305g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• GAUI GU-365 FES gyro (Flybarless E-Stabilizer System)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203933 - Gaui Hurricane 200 V2 XFES Flybarless Combo ARF
• The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size.
• Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with BL motor and 18A ESC.
• New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
• New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.
• Kit comes with additional Gold Plated Connectors (1.8mm) with Heat Shrink Tubing for Motor and ESC
• Kit comes with 1 GAUI GU-365 FES gyro (Flybarless E-Stabilizer System)

q Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 100mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 285g ~ 305g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

G-203941 - Gaui Hurricane 200 V2 Super Combo
Gaui Hurricane 200 V2 Super Combo With Aluminum Carrying Case

• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• 90% assembled modulate parts which is easy for completion.
• 90%l assembled kit comes with BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New GF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New Fin and Tail(Type E).
• New light-weight fiber glass Stylish Airbrushed Canopy.(Each kit come with 1 canopy, Color choosed at Random)
• High Performance Stabilizer Blades and 42mm Tail Rotor Blades.
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• Kit comes with More spare parts and blades
• Kit comes with tools and additional plentiful spare parts.
• Kit comes with Digital servos x4 and GU -210 heading hold gyro/ Battery

Specification:
• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm (SP Main Blades x1, High Rigidity SP Main Bladesx2, CF Blade x1)
Flying duration: 5~6 minutes with 7.4v/900mah Li-Po battery (included)

Items needed for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 6 (or more) channel micro receiver
• Charger: Li-Po battery charger