 |
|
| HYPERION G3 EX 5000 MAH 6S 22.2V 45C/90C LIPOLY SPLIT PACK
|
 |
HP45C50006SS
- HYPERION G3 EX 5000 MAH 6S 22.2V 45C/90C LIPOLY SPLIT PACK
HYPERION G3 EX 5000 MAH 6S 22.2V 45C/90C LIPOLY SPLIT PACK
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.
But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.
The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake
The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.
The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets
|
|
|
|
| T-REX 550E FBL Kit Combo w/Elecs, No Battery
|
 |
KX021002
- T-REX 550E FBL Kit Combo w/Elecs, No Battery
• Newly designed aerodynamically efficient metal main blade control system
• Dual section battery mount
• New lightweight high precision main gear and main gear hub
  
• New lightweight rigid metal main shaft bearing blocks/Integrated swash anti-rotation guide and gyro mounting platform
• Rear mounted rudder servo mount
• High speed rated thrust bearings in tail blade grips/Metal bearing mount
  
• High efficiency torque tube drive
• 600M high efficiency, high torque brushless motor
• 520 carbon main blades
  
• DS610 digital servos /DS6 servo horns
• DS620 Digital servo/RCE-BL70G ESC
• 3G Programmable Flybarless System
  
Instruction: (3G Programmable Flybarless System)
• 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
• Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
• 12 bit processors providing ultra high resolution, resulting in highly precise controls
• Software upgradable through PC interface adapter (sold separately)
• Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
• Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
• Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
• Suitable for all CCPM and mechanical mixing system.
• Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
• Innovative Pitch Gau as an aid to facilitate pitch adjustments.
• High frame rate signal output for faster and higher precision servo response.
• Capable to operate between 3V to 8.4V, compatible with high voltage servos.
• Small footprint, light weight, minimalists and reliable design
Features:
1. Newly designed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision.
2. New lightweight high precision main gear, with excellent balance and stability.
3. New lightweight metal main gear hub.
4. New lightweight rigid metal main shaft bearing blocks.
5. Integrated swash anti-rotation guide and gyro mounting platform.
6. Convenient carbon fiber ESC mount for installation either on top of tail boom mount for maximum cooling from main blades, or under rudder servo for maximum flexibility.
7. Dual section battery mount for optimal CG position based on battery weight.
8. 3K carbon fiber side frame and base plate, simple yet highly rigid for ease of maintenance.
9. 600 helicopter grade 21.5mm diameter tail boom providing superior rigidity and stability.
10. Newly designed rear mounted rudder servo mount, for pleasing aesthetic as well as improving side frame strength and protection to the rudder servo.
11. High speed rated thrust bearings in tail blade grips.
12. High efficiency torque tube drive.
13. High strength carbon fiber used on tail fins and tail boom supports.
14. New lightweight landing gears.
15. High grade airbrushed fiberglass canopy.
Specifications: (3G Programmable Flybarless System)
• Suitable Voltage Range: DC 3-8.4V
• Current Comsumption: <80mA at 4.8V>
• Flip and Roll rate detection speed: ±300degrees/sec
• Rudder rate detection speed: ±500degrees/sec
• Sensor resolution: 12bit
• Operating temperature: -20°C to 65°C
• Operating humidity: 0 percent - 95 percent
• RoHS certified
• Dimension:
Control box: 42x26.5x14.5mm
Sensor: 22.3x21.7x14mm
• Weight:
Control box:16g
Sensor: 9g
Specifications:
• Length: 1042mm
• Height: 364mm
• Main Blade Length: 520mm
• Main Rotor Diameter: 1188mm
• Tail Rotor Diameter: 254mm
• Motor Drive Gear: 16T
• Main Drive Gear: 170T
• Autorotation Tail Drive Gear: 180T
• Tail Drive Gear: 40T
• Drive Gear Ratio: 1:10.62:4.5
• Weight (With Motor): 1800g
• Flying Weight: Approx. 2800g
Accessories:
• T-REX 550E 3G Kits Set X1
• Aluminum Tail Boom X1
• RCE-BL70G Brushless ESC x1
• 520 Carbon fiber blades X1
• DS610 Digital servoX3 set
• DS620 Digital servo X1
• Flybarless System X1 set
• 600M Brushless Motor X1
• 90mm 3K Carbon Fiber Tail Blades X1 Set
Radio transmitter and electronic equipment required for assembly: (sold separately)
• Transmitter (7-channel or more, helicopter system)
• Receiver (7-channel or more)
• 6S Li-Po 2600 - 5200mAh
• Dial Pitch Gauge
|
|
|
|
| T-REX 550E Kit Combo w/Elecs, No Battery
|
|
|
|
|
|
 |
