300101 - PN Racing Mini-Z Machine Cut Delrin Front 0,1 Rim for Interchangeable Wheel Rims (2pcs)
PN Racing Mini-Z Machine Cut Delrin Front 0,1 Rim for Interchangeable Wheel Rims (2pcs)

For 2WD Rear 0 and 1 offset

For AWD Rear 0, 0.5, 1 and 1.5 offset

These Interchangeable rims require separate 2WD Wheel Hub (300302) or AWD Wheel Hub (300304)

300123 - PN Racing Mini-Z Machine Cut Delrin Front 2,3 Rim for Interchangeable Wheel Rims (2pcs)
PN Racing Mini-Z Machine Cut Delrin Front 2,3 Rim for Interchangeable Wheel Rims (2pcs)

For 2WD Rear 2 and 3 offset

For AWD Rear 2, 2.5, 3 and 3.5 offset

These Interchangeable rims require separate 2WD Wheel Hub (300302) or AWD Wheel Hub (300304)

300201 - PN Racing Mini-Z Machine Cut Delrin Rear 0,1 Rim for Interchangeable Wheel Rims (2pcs)
PN Racing Mini-Z Machine Cut Delrin Rear 0,1 Rim for Interchangeable Wheel Rims (2pcs)

For 2WD Rear 0 and 1 offset

For AWD Rear 0, 0.5, 1 and 1.5 offset

These Interchangeable rims require separate 2WD Wheel Hub (300302) or AWD Wheel Hub (300304)

300223 - PN Racing Mini-Z Machine Cut Delrin Rear 2,3 Rim for Interchangeable Wheel Rims (2pcs)
PN Racing Mini-Z Machine Cut Delrin Rear 2,3 Rim for Interchangeable Wheel Rims (2pcs)

For 2WD Rear 2 and 3 offset

For AWD Rear 2, 2.5, 3 and 3.5 offset

These Interchangeable rims require separate 2WD Wheel Hub (300302) or AWD Wheel Hub (300304)

300302 - PN Racing Mini-Z 2WD Aluminum Wheel Hub for Interchangeable Rims (2pcs)
PN Racing Mini-Z 2WD Aluminum Wheel Hub for Interchangeable Rims (2pcs)

Interchangeable rims sold separately:
•Front 0 and 1 offset, part number 300101
•Front 2 and 3 offset, part number 300123
•Rear 0 and 1 offset, part number 300201
•Rear 2 and 3 offset, part number 300223

Included:
•2 x AWD Aluminum Wheel Hub
•8 x M1.5x4 Socket Head Cap Screw
•1 x 1.3mm Hex Wrench

300308 - PN Racing Mini-Z M1.5x4 Socket Head Cap Screw Set for Interchangeable Wheel Rims (8pcs)
PN Racing Mini-Z M1.5x4 Socket Head Cap Screw Set for Interchangeable Wheel Rims (8pcs)

400320 - PN Racing Mini-Z Pro Match Delrin Pinion 10T (2 pcs)
PN Racing Mini-Z Pro Match Delrin Pinion 10T (2 pcs)

The perfect match to Kyosho or PN Spur gear pitch. The gears are smooth. There was NO loss due to the gears not meshing right. After letting up on the throttle my car would just roll and roll with little loss due to the gears. It will make your car stealth-like with very little sound.

400324 - PN Racing Mini-Z Pro Match Delrin Pinion 7T-10T
PN Racing Mini-Z Pro Match Delrin Pinion 7T-10T

Comes with 7T, 8T, 9T, 10T (1 pcs ea.)
The perfect match to Kyosho or PN Spur gear pitch. The gears are smooth. There was NO loss due to the gears not meshing right. After letting up on the throttle my car would just roll and roll with little loss due to the gears. It will make your car stealth-like with very little sound.

400327 - PN Racing Mini-Z Pro Match Delrin Pinion 7T (2 pcs)
PN Racing Mini-Z Pro Match Delrin Pinion 7T (2 pcs)

The perfect match to Kyosho or PN Spur gear pitch. The gears are smooth. There was NO loss due to the gears not meshing right. After letting up on the throttle my car would just roll and roll with little loss due to the gears. It will make your car stealth-like with very little sound.

400328 - PN Racing Mini-Z Pro Match Delrin Pinion 8T (2 pcs)
PN Racing Mini-Z Pro Match Delrin Pinion 8T (2 pcs)

The perfect match to Kyosho or PN Spur gear pitch. The gears are smooth. There was NO loss due to the gears not meshing right. After letting up on the throttle my car would just roll and roll with little loss due to the gears. It will make your car stealth-like with very little sound.

400329 - PN Racing Mini-Z Pro Match Delrin Pinion 9T (2 pcs)
PN Racing Mini-Z Pro Match Delrin Pinion 9T (2 pcs)

The perfect match to Kyosho or PN Spur gear pitch. The gears are smooth. There was NO loss due to the gears not meshing right. After letting up on the throttle my car would just roll and roll with little loss due to the gears. It will make your car stealth-like with very little sound.

400408 - PN Racing Mini-Z Machine Cut Delrin Pro Pinion 8T
PN Racing Machine Cut Delrin Pro Pinion 8T

for MR-01, MR-02 and MR-015 use.

400409 - PN Racing Mini-Z Machine Cut Delrin Pro Pinion 9T
PN Racing Machine Cut Delrin Pro Pinion 9T

for MR-01, MR-02 and MR-015 use.

400410 - PN Racing Mini-Z Machine Cut Delrin Pro Pinion 10T
PN Racing Machine Cut Delrin Pro Pinion 10T

for MR-01, MR-02 and MR-015 use.

605045 - PN Racing Mini-Z MR-01 Titanium Ball Differential Shaft
PN Racing Mini-Z MR-01 Titanium Ball Differential Shaft

700302 - PN Racing Mini-Z Screws Set
PN Racing Mini-Z Screws Set

MR2851 - PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 51T
PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 51T

•New design for 2WD Ball Differential replacement
•Limited Slip Spur Gear
•Machine Cut Delrin
•64 Pitch
•Save grease V Grooves

MR2852 - PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 52T
PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 52T

•New design for 2WD Ball Differential replacement
•Limited Slip Spur Gear
•Machine Cut Delrin
•64 Pitch
•Save grease V Grooves

MR2853 - PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 53T
PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 53T

•New design for 2WD Ball Differential replacement
•Limited Slip Spur Gear
•Machine Cut Delrin
•64 Pitch
•Save grease V Grooves

MR2854 - PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 54T
PN Racing Mini-Z 2WD Machine Cut Delrin Limited Slip 64P Spur Gear 54T

•New design for 2WD Ball Differential replacement
•Limited Slip Spur Gear
•Machine Cut Delrin
•64 Pitch
•Save grease V Grooves

MZ211 - Kyosho Mini-Z Adband RA-6 I.C.S R/C Unit Set
Kyosho Mini-Z Adband RA-6 I.C.S R/C Unit Set

This is a Adband PCB board, it require Adband modules and crystal.
Comes with servo position sensor ( pot ), On/Off switch and servo Motor all wired and ready to be installed.
More frequency channels available (1~20) then the regular AM 27MHz.
• Programmable esc setting (ICS setting instruments sold separately)
• Programmable servo setting (ICS setting instruments sold separately)

MZ8-3 - Kyosho Mini-Z Servo Gear Shaft Set
Kyosho Mini-Z Servo Gear Shaft Set

MZW11C - Kyosho Mini-Z Clear Chassis
Kyosho Mini-Z Clear Chassis

This is the Optional Main Chassis for the Kyosho Mini-Z Racers. This holds all components of the Mini-Z.

FEATURES:
Plastic construction Clear in color. Has slots for four AA batteries. Has opening for on/off switch.

INCLUDES:
One clear plastic chassis with receiver/speed control cover.

REQUIRES:
Assembly of the rest of the components.

SPECS:
Length: 3-3/8"
Width: 1-7/8"
Height: 1"

COMMENTS:
This does not include any screws or bolts.

MZW11CB - Kyosho Mini-Z Clear Blue Chassis
Kyosho Mini-Z Clear Chassis

This is the Optional Main Chassis for the Kyosho Mini-Z Racers. This holds all components of the Mini-Z.

FEATURES:
Plastic construction Clear Blue in color. Has slots for four AA batteries. Has opening for on/off switch.

INCLUDES:
One plastic chassis with receiver/speed control cover.

REQUIRES:
Assembly of the rest of the components.

SPECS:
Length: 3-3/8"
Width: 1-7/8"
Height: 1"

COMMENTS:
This does not include any screws or bolts.

MZW11CG - Kyosho Mini-Z Clear Green Chassis
Kyosho Mini-Z Clear Chassis

This is the Optional Main Chassis for the Kyosho Mini-Z Racers. This holds all components of the Mini-Z.

FEATURES:
Plastic construction Clear Green in color. Has slots for four AA batteries. Has opening for on/off switch.

INCLUDES:
One plastic chassis with receiver/speed control cover.

REQUIRES:
Assembly of the rest of the components.

SPECS:
Length: 3-3/8"
Width: 1-7/8"
Height: 1"

COMMENTS:
This does not include any screws or bolts.

MZW11CP - Kyosho Mini-Z Clear Pink Chassis
Kyosho Mini-Z Clear Chassis

This is the Optional Main Chassis for the Kyosho Mini-Z Racers. This holds all components of the Mini-Z.

FEATURES:
Plastic construction Clear Pink in color. Has slots for four AA batteries. Has opening for on/off switch.

INCLUDES:
One plastic chassis with receiver/speed control cover.

REQUIRES:
Assembly of the rest of the components.

SPECS:
Length: 3-3/8"
Width: 1-7/8"
Height: 1"

COMMENTS:
This does not include any screws or bolts.

MZW13BL - Kyosho Mini-Z Blue Wheel Nut
Kyosho Mini-Z Blue Wheel Nut

MZW17-20 - Kyosho Mini-Z Wide Slick Tire #20 - Wide Size (4 pcs)
Kyosho Mini-Z Wide Slick Tire #20 ( Wide Size )

MZW17-30 - Kyosho Mini-Z Wide Slick Tire #30 - Wide Size (4 pcs)
Kyosho Mini-Z Wide Slick Tire #30 ( Wide Size )

MZW2-20 - Kyosho Mini-Z 20 Degree, 8.5mm High Grip Tire (4 pcs)
Kyosho Mini-Z 20 Degree, 8.5mm High Grip Tire (4 pcs)

MZW2-30 - Kyosho Mini-Z 30 Degree, 8.5mm High Grip Tire (4 pcs)
Kyosho Mini-Z 30 Degree, 8.5mm High Grip Tire (4 pcs)

MZW2-40 - Kyosho Mini-Z 40 Degree, 8.5mm High Grip Tire (4 pcs)
Kyosho Mini-Z 40 Degree, 8.5mm High Grip Tire (4 pcs)

MZW215 - Kyosho Mini-Z MR-01 Setting Spacer Set
Kyosho Mini-Z MR-01 Setting Spacer Set

MZW25-20 - Kyosho Mini-Z Semi Wide Slick Tire #20
Kyosho Mini-Z Semi Wide Slick Tire #20

MZW25-30 - Kyosho Mini-Z Semi Wide Slick Tire #30
Kyosho Mini-Z Semi Wide Slick Tire #30

MZW33-15 - Kyosho Shape Memory Antenna
Kyosho Shape Memory Antenna

MZW33-23 - Kyosho Mini-Z Shape-memory Antenna (for MINI-Z Racer/23mm)
Kyosho Mini-Z Shape-memory Antenna (for MINI-Z Racer/23mm)

MZW5 - Kyosho Mini-Z MR-01 Cabon T-Bar set
Kyosho Mini-Z MR-01 Cabon T-Bar set

Soft, Medium and Hard For MR01 only.

MZW8P - Kyosho Mini-Z X-Speed Motor V
Kyosho Mini-Z X-Speed Motor V
This is the Optional Motor for the Kyosho Mini-Z Racers.

This is located in the rear of the car and drives the spur gear.

FEATURES:
Plastic closed end bell Capacitors pre-soldered on wire and spade-type connectors pre-installed.

INCLUDES:
One X-Speed Mini-Z motor with two metal Bushings and connectors pre-installed.

REQUIRES:
Assembly into a Mini-Z.

SPECS:
50T single wound wire. Wire is .012 thick.

DIMENSIONS:
Length: 46mm
Width: 26mm
Height: 18mm

ORG04 - Kyosho Mini-Z Silicone O-Ring (P4/Orange, 10 pcs)
Kyosho Mini-Z Silicone O-Ring (P4/Orange, 10 pcs)